ALFA NETWORK Wireless Extender Package W/ACR-1202 with Car Charger Wifi CampPro 2 v2 (WiFiCamp-Pro2V2)
This special kit features all needed equipment to pick up a weak Wi-Fi signal and repeat it as your own personal hotspot. This is ideal for use on Boats, RVs, Campers, or Larger properties.
| Price: | For orders (total sum): |
| 92.66$ | >0$ |
| 91.24$ | >500$ |
| 89.81$ | >1000$ |
| 88.39$ | >5000$ |
| 86.96$ | >10000$ |
|
Out of stock 0 pcs
|
|
Features:
WiFi 2v2 is a professionally tuned and highly integrated system that and extend Internet access for RV & yacht from remote WiFi hotspots.
- Simple & Comprehensive Setup
QR-Setup via smartphone or wizard via web demands no expertise during setting up - Extends WiFi hotspot Internet access from far away, and enhance the WiFi coverage inside your yacht or RV
Easily make WiFi or VoIP calls when cellular signal is weak. - Scans and connects to and rebroadcasts around your yacht and RV
Instantly share the extended Internet access to your mobile devices, smart TVs, and gaming consoles
Included in the box:
– Alfa R36A USB router
– Indoor Antenna ARS -N05
– Tube-UNA USB outdoor signal receiver + 8m (26 feet) USB cable.
– 12V power supply for R36
– Outdoor omni antenna for Tube-U
– Waterproof tape and wire ties for mounting Tube to pole
– R36 car/vehicle power supply adapter
How it works
Use all three of these components above together to boost and share a Wi-Fi signal. Simply connect your computer to the R36A via ethernet cable for a one-time configuration and setup. Connect the AOA-2409TF antenna to the Tube-U(N) receiver, then connect the Tube-U(N) to the USB port on the R36A. Using Wi-Fi scanning software built-into the R36A that you will see during the setup wizard, you can scan for and connect to available wireless networks in your area. Once the R36A has connected to a network, you will be prompted to name and password protect your own new local Wi-Fi network, offering any device within a few hundred feet the ability to use the same distant Wi-Fi signal.
Range
There is no specific range that can be computed as range can vary greatly based on environment and environmental factors like obstacles and interference. We recommend using this in an area where other devices can at least get a weak signal to the desired network, such as one bar. If the environment is such that your devices cannot even see the desired network form the place of intended use, the Camp Pro may not work well there.
Specification:
Indoor WiFi Device
| Wi-Fi Standard | IEEE802.11n IEEE802.11g IEEE802.11b |
| Frequency | 2.142 GHz - 2.472 GHz |
| Channel-Width | 20/40 MHz |
| Data Rate | 802.11b: up to 11 Mbps 802.11g: up to 54 Mbps 802.11n: up to 300 Mbps |
| Antenna | 1x internal 1x external |
| LED Indicators | Power, LAN, WAN, WLAN, USB |
| Power Requirement | 12V DC |
| Security | WEP 64/128 bit WPA-PSK WPA-EAP (PEAP/TTLS) WPA2-PSK WPA2-EAP WPA Mixed 802.1x authentication |
| Operation Temperature | -20 °C ~ 40 °C |
| Storage Humidity | 10% ~ 90% (Non-conensing) |
| Dimension (mm) | 93 x 70 x 26 mm |
| Weight | 74g |
Outdoor WiFi USB Device
| Wi-Fi Standard | IEEE802.11n IEEE802.11g IEEE802.11b |
| Frequency | 2.142 GHz - 2.472 GHz |
| Channel Width | 20/40 MHz |
| Antenna Connector | N male |
| Interface | USB Type-A |
| LED Indicator | Power / Connection |
| Power Required | 5VDC ± 5% |
Outdoor Antenna
| Frequency | 2400 MHz - 2500 MHz |
| Gain | 9 dBi |
| Impedance | 50Ω |
| VSWR | 2.0 : 1 |
| Radiation | Omni |
| Connector | N female |
| Material | Fiber glass |
| Length | 460 mm |
Indoor Antenna
| Frequency | 2400 MHz - 2500 MHz |
| Gain | 5 dBi |
| Impedance | 50Ω |
| VSWR | 2.0 : 1 |
| Radiation | Omni |
| Connector | RP-SMA female |
| Material | Rubber |
| Length | 171.5 mm |
