TELTONIKA 5G 4G (LTE) Cat.20 Wi-Fi 6 Industrial Cellular Router (RUTC50)

Features:

The RUTC50 is a 5G router featuring dual-band Wi-Fi 6 technology with multi-user MIMO, ensuring ultra-high cellular speeds of up to 3.4 Gbps. This 5G router is also equipped with dual SIM with auto-failover, five Gigabit Ethernet ports, and GNSS for precise location tracking. The RUTC50 supports both SA and NSA 5G architectures and is backward compatible with 4G (Cat 20) and 3G, ensuring robust and reliable performance.

5G
Ultra-high cellular speeds of up to 3.4 Gbps

Wi-Fi 6
Dual-band multi-user MIMO wireless capabilities

Processing Power
Increased processing capacity for multi-user and edge computing applications

Dual SIM
With auto-failover, backup WAN, and other switching scenarios

Specification:

Mobile
    Mobile module
    5G Sub-6Ghz SA/NSA 2.4/3.4Gbps DL (4x4 MIMO), 900/550 Mbps UL (2x2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 210Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL
    3GPP Release
    Release 16
    SIM switch
    2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
    Status
    Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, SIM provider, operator, network type, cell ID, LAC, TAC, ARFCN, UARFCN, EARFCN
    SMS
    SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
    USSD
    Supports sending and reading Unstructured Supplementary Service Data messages
    Black/White list
    Operator black/white list (by country or separate operators)
    Multiple PDN
    Possibility to use different PDNs for multiple network access and services
    Band management
    Band lock, Used band status display
    SIM idle protection service
    When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then
    SIM PIN code management
    SIM PIN code management enables setting, changing, or disabling the SIM card's PIN
    APN
    Auto APN
    Bridge
    Direct connection (bridge) between mobile ISP and device on LAN
    Passthrough
    Router assigns its mobile WAN IP address to another device on LAN
    Framed routing
    Framed routing: support an IP network behind 5G UE
Wireless
    Wireless mode
    802.11b/g/n/ac/ax (Wi-Fi 6) with data transmission rates up to 2402Mbps on 5GHz, 576Mbps on 2.4GHz (Dual Band, MU-MIMO)
    Wi-Fi security
    WPA2-Enterprise - PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect
    SSID/ESSID
    ESSID stealth mode
    WiFi users
    Up to 512 simultaneous connections
    Wireless Connectivity Features
    Wireless mesh (802.11s), fast roaming (802.11r), BSS transition management (802.11v), radio resource measurement (802.11k)
    Wireless MAC filter
    Whitelist, blacklist
    Wireless QR code generator
    Once scanned, a user will automatically enter your network without needing to input login information.
Ethernet
    WAN
    1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
    LAN
    4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Network
    Routing
    Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
    Network protocols
    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
    VoIP passthrough support
    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
    Network Management
    802.1x port-based network access control client
    Connection monitoring
    Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
    Firewall
    Port forward, traffic rules, custom rules
    Firewall status page
    View all your Firewall statistics, rules, and rule counters
    Ports management
    View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
    Network topology
    Visual representation of your network, showing which devices are connected to which other devices
    DHCP
    Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
    QoS / Smart Queue Management (SQM)
    Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
    DDNS
    Supported >25 service providers, others can be configured manually
    DNS over HTTPS
    DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
    Network backup
    Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
    Load balancing
    Balance Internet traffic over multiple WAN connections
    Hotspot
    Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
    SSHFS
    Possibility to mount remote file system via SSH protocol
Security
    Authentication
    Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
    Firewall
    Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
    Attack prevention
    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
    VLAN
    Port and tag-based VLAN separation
    Mobile quota control
    Mobile data limit, customizable period, start time, warning limit, phone number
    WEB filter
    Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
    Access control
    Flexible access control of SSH, Web interface, CLI and Telnet
    SSL certificate generation
    Let's encrypt support
VPN
    OpenVPN
    Multiple clients and a server can run simultaneously, 27 encryption methods
    OpenVPN Encryption
    DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
    BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
    IPsec
    XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
    GRE
    GRE tunnel, GRE tunnel over IPsec support
    PPTP, L2TP
    Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
    Stunnel
    Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
    DMVPN
    Method of building scalable IPsec VPNs
    SSTP
    SSTP client instance support
    ZeroTier
    ZeroTier VPN client support
    WireGuard
    WireGuard VPN client and server support
    Tinc
    Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
    Tailscale
    Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol
OPC UA
    Supported modes
    Client, Server
    Supported connection types
    TCP
MODBUS
    Supported modes
    Server, Client
    Supported connection types
    TCP, USB
    Custom registers
    MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
    Supported data formats
    8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
Data to Server
    Protocol
    HTTP(S), MQTT, Azure MQTT, Kinesis
    Data to server
    Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature
MQTT Gateway
    Modbus MQTT Gateway
    Allows sending commands and receiving data from MODBUS Server through MQTT broker
DNP3
    Supported modes
    Station, Outstation
    Supported connection
    TCP
DLMS
    DLMS Support
    DLMS - standard protocol for utility meter data exchange
    Supported modes
    Client
    Supported connection types
    TCP, USB
API
    Teltonika Networks Web API (beta) support
    Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
Monitoring & Management
    WEB UI
    HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
    FOTA
    Firmware update from server, automatic notification
    SSH
    SSH (v1, v2)
    SMS
    SMS status, SMS configuration, send/read SMS via HTTP POST/GET
    Call
    Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
    Email
    Receive email message status alerts of various services
    TR-069
    OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
    MQTT
    MQTT Broker, MQTT publisher
    SNMP
    SNMP (v1, v2, v3), SNMP Trap, Brute force protection
    JSON-RPC
    Management API over HTTP/HTTPS
    RMS
    Teltonika Remote Management System (RMS)
IoT Platforms
    Cloud of Things
    Allows monitoring of: Device data, Mobile data, Network info, Availability
    ThingWorx
    Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
    Cumulocity
    Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
    Azure IoT Hub
    Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
System Characteristics
    CPU
    Mediatek, Dual-core, 1.3 GHz, ARM Cortex A53
    RAM
    512MB DDR3
    FLASH storage
    16MB serial NOR flash, 512MB serial NAND flash
Firmware / Configuration
    WEB UI
    Update FW from file, check FW on server, configuration profiles, configuration backup
    FOTA
    Update FW
    RMS
    Update FW/configuration for multiple devices at once
    Keep settings
    Update FW without losing current configuration
    Factory settings reset
    A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration
Firmware Customisation
    Operating system
    RutOS (OpenWrt based Linux OS)
    Supported languages
    Busybox shell, Lua, C, C++
    Development tools
    SDK package with build environment provided
    GPL customization
    You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs
    Package Manager
    The Package Manager is a service used to install additional software on the device
Location Tracking
    GNSS
    GPS, GLONASS, BeiDou, Galileo and QZSS
    Coordinates
    GNSS coordinates via WebUI, SMS, TAVL, RMS
    NMEA
    NMEA 0183
    NTRIP
    NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
    Server software
    Supported server software TAVL, RMS
    Geofencing
    Configurable multiple geofence zones
USB
    Data rate
    USB 2.0
    Applications
    Samba share, USB-to-serial
    External devices
    Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
    Storage formats
    FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
Input / Output
    Input
    1 x Configurable digital Input, 0 - 6 V detected as logic low, 8 - 50 V detected as logic high
    Output
    1 x Configurable digital Output, Open collector output, max output 50 V, 300 mA
    Events
    Email, RMS, SMS
    I/O juggler
    Allows to set certain I/O conditions to initiate event
Power
    Connector
    4-pin industrial DC power socket
    Input voltage range
    9 - 50 VDC, reverse polarity protection, voltage surge/transient protection
    PoE (passive)
    Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC (Available from: HW revision 0003, Batch number 007)
    Power consumption
    Idle: < 4.5 W, Max: < 13.5 W
Physical Interfaces
    Ethernet
    5 x RJ45 ports, 10/100/1000 Mbps
    I/O’s
    1 x Digital Input, 1 x Digital Output on 4-pin power connector
    Status LEDs
    4 x WAN status LEDs, 3 x Mobile connection type, 3 x Mobile connection strength, 8 x LAN status, 1 x Power, 2 x 2.4G and 5G Wi-Fi, 2 x WAN status
    SIM
    2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
    Power
    1 x 4-pin power connector
    Antennas
    4 x SMA for Mobile, 3 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
    USB
    1 x USB A port for external devices
    Reset
    Reboot/User default reset/Factory reset button
    Other
    1 x Grounding screw
Physical Specification
    Casing material
    Anodized aluminum housing and panels
    Dimensions (W x H x D)
    130.4 x 42.6 x 103.4 mm
    Weight
    452 g
    Mounting options
    DIN rail, wall mount, flat surface (all require additional kit)
Operating Environment
    Operating temperature
    -40 °C to 75 °C
    Operating humidity
    10% to 90% non-condensing
    Ingress Protection Rating
    IP30